iopqq.blogg.se - Motorola pro 5100 vhf

MOTOROLA PRO 5100 VHF INSTALL
MOTOROLA PRO 5100 VHF MANUAL
MOTOROLA PRO 5100 VHF PORTABLE
MOTOROLA PRO 5100 VHF CODE
MOTOROLA PRO 5100 VHF PROFESSIONAL

As with all fixed site antenna installations, it is the responsibility of the licensee to manage the site in accordance with applicable regulatory requirements and may require additional compliance actions such as site survey measurements, signage, and site access restrictions in order to insure that exposure limits are not exceeded.ĮLECTROMAGNETIC INTERFERENCE/COMPATIBILITY.The antenna should be mounted outside the building on the roof or a tower if at all possible.If mobile radio equipment is installed at a fixed location and operated as a control station or as a fixed unit, the antenna installation must comply with the following requirements in order to ensure optimal performance and compliance with the RF energy exposure limits in the above standards and guidelines. Unauthorized antennas, modifications, or attachments could damage the radio and may violate FCC regulations.įor a list of approved Motorola accessories please contact your dealer, or local Motorola representative. Use only Motorola approved supplied antenna or Motorola approved replacement antenna.

MOTOROLA PRO 5100 VHF MANUAL

Instructions in the Radio Installation Manual The requirements of the antenna manufacturer/supplierī.

The antenna installation must additionally be in accordance with:Ī.

These mobile antenna installation guidelines are limited to metal body vehicles.

MOTOROLA PRO 5100 VHF INSTALL

Install antennas at the center of the roof or the center of the trunk deck.Table 1: Rated Power and Lateral Distance Table 1 lists the minimum lateral distance for bystanders in an uncontrolled environment from the transmitting antenna at several different ranges of rated radio power for mobile radios installed in a vehicle. Transmit only when people outside the vehicle are at least the minimum lateral distance away, as shown in Table 1, from a properly installed, externally-mounted antenna.To transmit (talk), push the Push-To-Talk (PTT) button to receive, release the PTT button.To ensure optimal performance and compliance with the RF energy exposure limits in the above standards and guidelines, users should transmit no more than 50% of the time and always adhere to the following procedures: Operational Instructions and Training Guidelines ANATEL, Brazil Regulatory Authority, Resolution 256 (April 11, 2001) "additional requirements for SMR, cellular and PCS product certification.".Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2001.Limits of Human Exposure to Radio frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999

MOTOROLA PRO 5100 VHF CODE

Ministry of Health (Canada) Safety Code 6.

International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998.

Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition.

American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95.

United States Federal Communications Commission, Code of Federal Regulations 47CFR part 2 sub-part J.

Your Motorola two-way radio complies with the following RF energy exposure standards and guidelines: In terms of measuring RF energy for compliance with the FCC exposure guidelines, your radio radiates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. This radio complies with the IEEE (FCC) and ICNIRP exposure limits at duty cycles of up to 50% talk-50% listen and should be used for occupational use only. Your Motorola two-way radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy.

READ THIS IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION BEFORE INSTALLING AND USING YOUR MOTOROLA MOBILE TWO-WAY RADIO IN A VEHICLE OR AS A CONTROL STATION.Ĭompliance with RF Energy Exposure Standards Information and Instructions on RF Energy Exposure and Product Safety

3.1 Initial Test Equipment Control Settings.

8.0 Radio Exploded Mechanical Views and Parts Lists.

7.2 Radio Chassis And Transceiver Board.

5.0 Disassembling and Reassembling the Radio - General.

4.0 Repair Procedures and Techniques - General.

3.0 Safe Handling of CMOS and LDMOS Devices.

2.1 Warranty Period and Return Instructions.

MOTOROLA PRO 5100 VHF PROFESSIONAL

Professional Series Two-Way Radios PR1500.

MOTOROLA PRO 5100 VHF PORTABLE

Professional Series Portable Two-way Radio GP338 XLS.